- itaste-ron.jpg (56.69 KiB) Viewed 4077 times
My iTaste VTR
My iTaste VTR
Ooooohhhhh so shinny,
-
mohsihummer
- RDD Junkie
- Posts: 1195
- Joined: Wed Jun 20, 2007 7:30 am
- Location: vijayawada, andhra pradesh & riyadh ,saudi arabia
- Contact:
Re: My iTaste VTR
Sweet. Any problems with customs?
That packaging... Its quite something else
Which charger did you order? nitecore or something else?
That packaging... Its quite something else
Which charger did you order? nitecore or something else?
Re: My iTaste VTR
Ill do a full review with all the info once I get it in my hands.
Right now its still in the states.
I would of got it from Fastech but they where not able to tell me if they where selling the new version or the old one.
Right now its still in the states.
I would of got it from Fastech but they where not able to tell me if they where selling the new version or the old one.
Re: My iTaste VTR
I know Im supposed to do a review and it will come truth be told Im having too much vaping this to bother wasting time on a review. Plus I am working 2 shits to justify a Sat Sunday off. This weekend.
A few things I noticed.
You go thru liquid really fast on this. Earlier 2Ml would last me a day. Now its 1/2 day.
I purchased an IMR 2000 Mah bat with this. Total waste of time. The old laptop bats work better and longer. Probally because they are 2800 Mah. A 2000 Mah IMR will be lucky to drive you 1/2 day if you vape a lot and vape at high voltage.
I also purchased a basic 3$ charger that works right now to charge this and all my other bats.
Have many many mods planed for this. From larger ring to take larger tanks. To reducing the weight. The weight is just absurd. It need not be this heavy.
I will probably just charge and store the IMR bat and sell it.
So as not to have any wear and tear on the orignal threads I am using an adapter. Its a 510 to 510 + Ego adaptor. This way the threads on the unit see zero wear.
Im not using the extender.
Im expecting all the Kanger large Pro Tanks except for the Mega and the Pro tank 1.
The Pro Tank 1 I call the nipple. Its obsolete and a little hard to come by. I know they are selling them in Indian stores though for 1.8K.
The best of the Large Pro Tanks landing up will be the Aero Tank with adjustable air flow.
The iClear 30 that comes with the VTR I have not used. Saving it up for something special.
Right now my T3D is my all day vape and flavor testing is done on the pro tank 2. With my own coil and wicks. Which I can swap out between flavors.
A few things I noticed.
You go thru liquid really fast on this. Earlier 2Ml would last me a day. Now its 1/2 day.
I purchased an IMR 2000 Mah bat with this. Total waste of time. The old laptop bats work better and longer. Probally because they are 2800 Mah. A 2000 Mah IMR will be lucky to drive you 1/2 day if you vape a lot and vape at high voltage.
I also purchased a basic 3$ charger that works right now to charge this and all my other bats.
Have many many mods planed for this. From larger ring to take larger tanks. To reducing the weight. The weight is just absurd. It need not be this heavy.
I will probably just charge and store the IMR bat and sell it.
So as not to have any wear and tear on the orignal threads I am using an adapter. Its a 510 to 510 + Ego adaptor. This way the threads on the unit see zero wear.
Im not using the extender.
Im expecting all the Kanger large Pro Tanks except for the Mega and the Pro tank 1.
The Pro Tank 1 I call the nipple. Its obsolete and a little hard to come by. I know they are selling them in Indian stores though for 1.8K.
The best of the Large Pro Tanks landing up will be the Aero Tank with adjustable air flow.
The iClear 30 that comes with the VTR I have not used. Saving it up for something special.
Right now my T3D is my all day vape and flavor testing is done on the pro tank 2. With my own coil and wicks. Which I can swap out between flavors.
Re: My iTaste VTR
I thought of using a skin. And made a few. I will post the dxf file up in case anybody wants to copy the design.
But it totally spoils the show of the unit.
So I thought long and hard about how to protect the unit. It should look brand new. It should never wear any moving part.
To prevent wear use an adapter. Either 510 to 510 + Ego or get a Kanger air flow control bottom.
My solution to preventing scratches as well as not spoiling the show was to get a Rino Screen Gaurd for a Nexus 5. Or ipad. And then cut it up.
I have a screen protecto over the screen. Then I have some on the front and back. And some near the switch.
This will reduce the number of scratches you get by over 80%. I have not covered every part of the VTR with screen gaurd. Just some critical places. When you look at it you cant even tell it has protection Just as you cant tell if a phone has a gaurd or not. I mean you have to pick it up and look really closely to notice the gaurd.
I like this will post some pics. You cant even see the protector. And it will keep my unit scratch free. From even micro scratches.
Still having too much fun to strip it and do any mods. Maybe when I get bored. Or after I start placing with the segeli.
Like to keep my gear looking brand new. Think this is the best way. No keen on skins or coatings. Or buffing ideas.
But it totally spoils the show of the unit.
So I thought long and hard about how to protect the unit. It should look brand new. It should never wear any moving part.
To prevent wear use an adapter. Either 510 to 510 + Ego or get a Kanger air flow control bottom.
My solution to preventing scratches as well as not spoiling the show was to get a Rino Screen Gaurd for a Nexus 5. Or ipad. And then cut it up.
I have a screen protecto over the screen. Then I have some on the front and back. And some near the switch.
This will reduce the number of scratches you get by over 80%. I have not covered every part of the VTR with screen gaurd. Just some critical places. When you look at it you cant even tell it has protection Just as you cant tell if a phone has a gaurd or not. I mean you have to pick it up and look really closely to notice the gaurd.
I like this will post some pics. You cant even see the protector. And it will keep my unit scratch free. From even micro scratches.
Still having too much fun to strip it and do any mods. Maybe when I get bored. Or after I start placing with the segeli.
Like to keep my gear looking brand new. Think this is the best way. No keen on skins or coatings. Or buffing ideas.
-
mohsihummer
- RDD Junkie
- Posts: 1195
- Joined: Wed Jun 20, 2007 7:30 am
- Location: vijayawada, andhra pradesh & riyadh ,saudi arabia
- Contact:
Re: My iTaste VTR
You can use 3m scotchguard protective film... thinner films should be cut-able by a sticker cutting drafter/printer to give you an exact match.
Re: My iTaste VTR
look up Rino screen Protectors.
Yes I have the DXF file you can cut it any any sticker cutting shop.
Yes I have the DXF file you can cut it any any sticker cutting shop.
-
mohsihummer
- RDD Junkie
- Posts: 1195
- Joined: Wed Jun 20, 2007 7:30 am
- Location: vijayawada, andhra pradesh & riyadh ,saudi arabia
- Contact:
Re: My iTaste VTR
LOL I dont think I got that mine was more like a cheap china clone.
But you get the idea.
Here are some nice pics of my VTR
But you get the idea.
Here are some nice pics of my VTR
- Attachments
-
- vtr.JPG (71.08 KiB) Viewed 3917 times
-
mohsihummer
- RDD Junkie
- Posts: 1195
- Joined: Wed Jun 20, 2007 7:30 am
- Location: vijayawada, andhra pradesh & riyadh ,saudi arabia
- Contact:
Re: My iTaste VTR
And yet you never posted any good pics of your bikes and cars
Looks good. Its quite easy to mistake the device for a pro electrical equipment or a bomb
Looks good. Its quite easy to mistake the device for a pro electrical equipment or a bomb
Re: My iTaste VTR
60$ -- 72$ with free shipping. Cant beat that price. Well worth it. This is a collectors item.