Setting up the RDD RXG Head.

[chinoy]

When you get your head back.
Please do not bolt it on and rip the engine.
Please set it up using some common sense.

First do not used a head gasket
Do not use any 3 Bond or gasket sealent.
After installing the head. Check the swuich with some soldering lead.
Your target should be anything more than .7mm anything less and you need to use an extra Base gasket for your barrel.
90% of the time it will be safe.
But if you hear your piston touching the head. Please take off the barrel and add an extra base gasket.