RDDREAMS.COM

A very small batch of RDD Analogue CDIs have been made ready.

The Price is Rs 900/- per unit.

The same CDI can be used on RD350 or RXG. (Wiring is only compatible for RD350)
If your pulsar coil is 70 Ohms or more the unit will work.

While I personally make no claims as to increase in power or mileage.
There are a lot of customers who love this unit. The main advantages are

1. That its plug and play. No changes are required to the timing.

2. It is close to impossible to blow up. Super reliable.

3. You don’t need a battery to power the CDI.

4. The Timing is static. (This is for all those Static is best types well freak out).

5. This kit was developed by us to over come the problems being faced by us when trying to use the other OEM CDI units available in the market.
i.e. we tried the scooty pep, tvs 50, shogun, rxg and all where giving us poor performance. This was our first major breakthrough product way before we made the digital.

We have used components you wont find in any of the OEM CDI units.
The rating of everything from the SCR to the Caps used are twice the value of that used by the OEMs. So while the OEMs claim to be static they actually jump around quite a bit.
Ask Vignest/Bikelover as we discovered this on his stock RXZ CDI.
The RDD CDI gives you true static. Rock stable timing and the best spark you can get from any CDI on the market.

These units are ready for delivery.

Im so depressed

People are sending me PMs asking what lighting they can run with the Analoguce CDI ?

WIll it replace points ?

Please understand the Analoguce CDI is a little black box 1" by 2" with some wires coming out of it.
Thats all it is. Thats all you get.
If you have an existing CDI kit which is running some crappy single cyclinder CDI you can switch to this unit. You may also want to change your HT coils at the same time. (Which are not provided)
To check if this CDI will work with your CDI kit. Make sure the pulsar Coil is at least 70 Ohms.

Im so depressed

People are sending me PMs asking what lighting they can run with the Analoguce CDI ?

WIll it replace points ?

Please understand the Analoguce CDI is a little black box 1" by 2" with some wires coming out of it.
Thats all it is. Thats all you get.
If you have an existing CDI kit which is running some crappy single cyclinder CDI you can switch to this unit. You may also want to change your HT coils at the same time. (Which are not provided)
To check if this CDI will work with your CDI kit. Make sure the pulsar Coil is at least 70 Ohms.

This Product has been discontinued.