selling off all my bikes.

Custom Racing parts marketed, developed & crafted by RDDreams.

Moderators: arun, chinoy

Post Reply
User avatar
chinoy
RDD Junkie
Posts: 34409
Joined: Tue Mar 05, 2002 1:50 pm
Location: Bangalore
Contact:

selling off all my bikes.

Post by chinoy »

The plan is to sell off all my bikes.
But I know better than anybody else that the bike has to be spot on both handling and performance wise. Before selling it.

So have started on putting everything together.

No hurry to sell so will only sell when I get the right offer.
Some of the bikes are
1. RD350 Front and back fury wheels. Dual disc in front with rear disc also. Offered 80K (SOLD)

2. RD350 monster. 1000RR front brakes as in calipers' master cylinder etc. Offered 1.4 Lakhs.

3. TZR250. Prinstine condition. Fresh top end. FIII Portin and high comp heads. RDD CDI. R6 caliper, New front rotor. New EBC pads all arround. New master cylinder in front. New Dash, new Dash mount, Bike was featured in BSM. Now it flies. Even new carbs. New rear shock, new FZR front springs etc. Offered 1.3 Lakhs.

4. One semi finished Hybrid. LC wheels, LC frame. Dual semi floating Ducati 310mm Rotors in front with Haybusa 6 pot calipers. best offer 55K
No engine.
To vilify a great man is the readiest way in which a little man can himself attain greatness.
Edgar Allan Poe
User avatar
chinoy
RDD Junkie
Posts: 34409
Joined: Tue Mar 05, 2002 1:50 pm
Location: Bangalore
Contact:

RE: selling off all my bikes.

Post by chinoy »

TZR250 Shagged Condition.
Will need to be rebuilt.
But starts and runs.
Good front end. Good brakes.

Best offer 55K.
Ps: Have all the parts in stock to make this into a track tool.
To vilify a great man is the readiest way in which a little man can himself attain greatness.
Edgar Allan Poe
User avatar
chinoy
RDD Junkie
Posts: 34409
Joined: Tue Mar 05, 2002 1:50 pm
Location: Bangalore
Contact:

RE: selling off all my bikes.

Post by chinoy »

One RZ350 Engine Complete with all parts i.e. CDI, PV Controler, Electronics,
Just been rebuilt. Runing .75 over can be bored out to 2mm that means you have something like 5 to 6 rebores left in hand.

Crank is also fresh.
New Reed Blocks, Manifolds etc.

Please note this is only the engine good to keep as a spare or to put on a RD frame for a dream hybrid Expecting 50K.
To vilify a great man is the readiest way in which a little man can himself attain greatness.
Edgar Allan Poe
Post Reply