Page 1 of 1

Exhaust / Chamber Spigot.

Posted: Thu Jan 18, 2007 7:36 pm
by chinoy
I have studied all the spigot systems used over the years.
They all have their Pros and Cons.
The two key areas I have focused on with these is

1. Perfect sealing. (Even a Pinhole gap between the Cylinder and the Exhaust can see a drastic drop of upto 50% in power. Think of the Exhaust chamber as a super charger. On our tuned exhauts the stuffing pulse is in excess of 25 PSI. The smallest leak can cause a huge drop here.

2. Perfect Flow. Even the slightest step can cause serious flow issues.

The idea behind these spigots is almost anybody with access to a gas welder can knock up an exhaust but what holds you back is the mounting system.

With this Kit. You dont have to worry about the mounting. You get two spigots, four Exhaust gaskets, two clamps.

Will work on all RDs / LC / RZ / RXZ / RX / RXG.

Price is 40$ a pair.
Custom inner dia or done to your specs at no extra cost.
Lots of never before seen touches. Like the Gasket is held in place with a small step.
Pics dont show all the features. So if you copy it you dont get it all.