RZ 350 YPVS RDD Pully Upgrade.
Posted: Thu Jul 20, 2006 7:57 pm
Price is 10$ or 8 Pounds plus shipping each.
Or INR Rs 500/-
Avalible in diffirent sizes.
Stock is 18.5mm
1st over size is 20mm
2nd over size is 22mm
3rd Over size is 24mm
Size refers to the diameter of the Pully.
Special extra soft cables are avalible also.
To install. Remove OE Pully.
Install New Pully.
Turn Ign on. And then off. To make sure PV is in fully open position.
Now adjust cables as per Yamaha Service manual.
This now means your valve is fully open.
It will just close deeper when you start the bike.
Proven Benefits:
1. Better Mileage
2. Better Power / accelration in low to mid.
To experience a new kinda RZ.
Install RDD RZ 350 CDI. Feel the boost in low and mid.
Then Install the 3rd Over Pully.
It wont even feel like a RZ350 anymore.
Or INR Rs 500/-
Avalible in diffirent sizes.
Stock is 18.5mm
1st over size is 20mm
2nd over size is 22mm
3rd Over size is 24mm
Size refers to the diameter of the Pully.
Special extra soft cables are avalible also.
To install. Remove OE Pully.
Install New Pully.
Turn Ign on. And then off. To make sure PV is in fully open position.
Now adjust cables as per Yamaha Service manual.
This now means your valve is fully open.
It will just close deeper when you start the bike.
Proven Benefits:
1. Better Mileage
2. Better Power / accelration in low to mid.
To experience a new kinda RZ.
Install RDD RZ 350 CDI. Feel the boost in low and mid.
Then Install the 3rd Over Pully.
It wont even feel like a RZ350 anymore.