King Mod Guide.

[chinoy]

The reason we opted to stock and sell the King mod other than the rave reviews it got was because it works with and can be setup to work with any tank or bat.
Which is something rare for a mech mod.


Here is how you setup the king mod.

1. Take the top part off. Back the silver adjuster out all the way.
Screw on your tank all the way. Till the bases meet. Then back it off loose half a turn.
Now screw in the silver adjuster pin till you feel it make contact with the 510 off the tank.
No need to use force.
Now back to your tank and turn it down that half thread you backed out.

2. Next adjust the switch to the throw you want. By holding the bottom nut with your thumb and rotating the switch in or out.
In to reduce throw and out to increase it.

3. Now put it all together. And shake the bat should not move. And when you press the fire button it should work.
If it does not. Then it means the bat is not making contact.

So take off the top cap. Without adjusting the main screw which you used to make contact with the 510. This time you turn the outer screw out or in till it makes contact with the bat.

Thats it enjoy.
If you still dont get it watch the youtube videos.