RXZ on RDD Pipes

[danzel]

shit i was caught between the devil and the deep blue sea. RZ or RXZ hmm. anyways i'm next in line for a ride on the devil's rxz if the time should come.

[chinoy]

fluck thats one wide power band.
You can pull it another 500-1000 RPM by switching maps.
Give it a shot. RUn the Blue wire to a Shogun kill s/w and throw it at the redline.
If you find it gives you another 1000 RPM we will hook it up to auto switch with a TPS.
Pick up a TVS victor TPS Rs 150 and bring it over with a RXG accel cable which still has the oil pump part with it.

[crazydiablo]

Yup thats a very wide power band. I have always got 5K powerband from your builds.

Its running on Curve 1. I did not like Curve 2. Tried curve 2 for running in when I was worried about blowing it up. Switched back to Curve 1 and she is moving nice.

If you really see, we cant ask anything more out of a small bore right? I would prefer a big bore setup similar to this.

[crazydiablo]

Danny buy the RZ man. Imagine an RZ on pipes

[crazydiablo]

Pulled off the barrels after around 1K of running. Not even a scratch on the barrel, no blowby. All this with a 60kms running with the chambers on. Pretty impressive man.

End of update for this setup.

[chinoy]

Thanks CrazyD.
Your post made my day.

Makes you wonder why some guys have no issues with RDD Chambers.
And some Choot-Fatangs cant even dialin their jetting for chambers.

[Jagadeesh]

Ron you said you will make pipes for Rx soon long back. Please start making some pipes

[ajaybiz]

Mohith this setup is best suited for RXZ body line or even RX135 can accomodate, specially the pipe part.

[crazydiablo]

we will see man.