Saying it once again - UNI ROCKS !!!

[nav75]

Finally on Thu fitted Chinoy Filter on my fiero. Was a bit difficult as compared to Bullet and CBZ as in Fiero I have to remove the complete air box.

Got the bike to run perfectly yesterday and since then, man what a rush (ok ok guys don't pounce me on this ).

Same uphill stretch I used to do around 90-95 and it used to take time to reach there. If I get some traffic then 90 was the max else I could manage to hit 95. Yesterday and Today even with traffic slowing my acceleration I was able to touch slightly over 95, which came preety quickly. Bike is revving great in all the gears. 60-80 in 3rd comes preety quick.

All in all, with no change to the carb just putting the filter bike has shown noticeable improvements.

Thanks Ron for introducing us to this wonderful thing called "Chinoy Filter".

[satyajitmenon]

Umm, you didn't upjet?

[nav75]

Not yet.

[cbr1000f]

Not yet.

increase in performance without upjetting ?
sure its not psychological

[arpandiv]

Nav good going! just rem my pointers on the bs26 ..its different jetting a CV carb compared to a slide..regarding the dyno runs set the RPMs to 3000 and 7000 to get the curve...more on this once i am back in pune.
CBR1000f u mite want to ride my Chinoy Filter shod pulsar if u have any doubts abt it being pscyological

[chinoy]

They are "Chinoy FIlters Man."
Just cause I dont have the money to pay some mag to re-lable it dosent mean you sguys shouldnt support me.

[nav75]

Sorry Ron about the goof up with the name.

Just to eliminate the psychological thing. Asked a collegue owning a Fiero to ride the bike. Well he says the pull is surely increased. Can't wait for the weekend now

[cbr1000f]

Nav good going! just rem my pointers on the bs26 ..its different jetting a CV carb compared to a slide..regarding the dyno runs set the RPMs to 3000 and 7000 to get the curve...more on this once i am back in pune.
CBR1000f u mite want to ride my Chinoy Filter shod pulsar if u have any doubts abt it being pscyological

could anyone point out the difference between a CV and a slide carb.i mean working differences.
because when i had the filter installed on my Rx it was running like shit!

either ways ... arpan you could come down with your bike anytime now to collect your parcel.its being lying at home for a while

[gravityman]

I am waiting to put my Chinoy Filter on my P180 from last 9 months because of jets.I am not able to get bigger jets. Can anyone help. Or can we bore out the P180 main jet to may be 115 size?

Come on guys need help here.

[cbr1000f]

I am waiting to put my Chinoy Filter on my P180 from last 9 months because of jets.I am not able to get bigger jets. Can anyone help. Or can we bore out the P180 main jet to may be 115 size?

Come on guys need help here.

doesnt ron deal in jets himself ..
you can try ordering them from him along with the Chinoy Filter eerrrr i mean CHINOY

[gravityman]

He doesnt make the S type jets that are used in pulsar he only has hex type for mikuni.

[rash]

He doesnt make the S type jets that are used in pulsar he only has hex type for mikuni.

What are u crying about...use the Solex Fiat main jet...u will get them in an asortation of deff sizes...
they are a direct replacement for the ones the pulsar Runs

[vivekjayasheel]

use the Solex Fiat main jet

Wouldn't it be more advisable to get them as blanks and then get them drilled by Ron?

[gravityman]

Sorry never heard of Solex Fiat.
Can someone shed some light on these and where to get them?
Or if anyone has them i will buy looking for 115 and 118 sizes

[bikelover]

@gravity - I think Rash meant the main jet of the carb from a Fiat car.

[gravityman]

gravity - I think Rash meant the main jet of the carb from a Fiat car.

Ok thank you. Will try that.